Your Harmony Hub should pair with your Windows PC and you'll get a success message on both your PC and your tablet. From there, you can map the buttons on your remote just like any other device through the Harmony app on your phone or tablet, or the MyHarmony app on your desktop. After pressing the "Wake" button in the FLIRC program and pressing the "Power" button on my remote, the FLIRC understood to wake the computer whenever I invoked "AspectRatio" by pressing the Power button on my remote. So, I assigned the "AspectRatio" function to my remote's Power button in MyHarmony (since I don't need the AspectRatio function), then plugged in the FLIRC and opened up the FLIRC software, setting it to "Full Keyboard". Just don't leave the button "unassigned" in MyHarmony, or it won't send any signal to the FLIRC when you're programming it.įor example, MyHarmony's "Flirc Kodi" profile doesn't have a function to wake the PC from sleep.
#Remote wake pc software
But if there are any functions missing, just assign a random function to a button in MyHarmony, then use the FLIRC software to "learn" that button on your remote.
If you're using the FLIRC, you can map your media center's functions in MyHarmony to the buttons on your remote, and most should work without any issue. If you haven't, check out our guide to getting started with Harmony first.įrom there, you can map the buttons on your remote just like any other device in MyHarmony. This guide assumes you've already become somewhat familiar with your remote and the MyHarmony software, and that you've set it up with your other devices.
#Remote wake pc how to
In this guide, I'll discuss how to set up each method, and how I use both in tandem for the best of both worlds. I actually use a combination of both for my PC, to make up for each method's inadequacies.
But it's more responsive than infrared, in my experience. On some PCs, it may not even be able to wake your computer from sleep. You'll need a cheap Bluetooth receiver (or a computer that already has one built-in), and it isn't quite as versatile. Bluetooth: If you have a Harmony Hub-supported remote, you can also control your PC with Bluetooth.Infrared can have a bit of lag on some systems, however (though some will be fine). You'll need a USB infrared receiver, which is cheap, and if you have a non-Harmony Hub remote, you'll need to point the remote at your media center to control it.
#Remote wake pc pro
Im running W11 Pro on a system with an ASUS motherboard. My only work around currently is to set the PC to never sleep, but this isnt a long term solution. Ive tried setting the Wake On Lan settings in the config (see screenshot attached) but again to no avail. But i still have the same issue when the computer sleeps MRD cant wake it.
Originally the Desktop PC was connected to the network via Wifi, which i though might be the problem so ive now turned off the wifi and used a wired ethernet connection instead. But can not be done if you are remote using the VPN to LAN. This is fine if you are physically near it eg. Sometimes i connect via LAN sometimes i connect over Dial In VPN to the router (which places me on the LAN).īoth the LAN and VPN to LAN access work fine, but if the computer goes to sleep you can not access it via MRD, the only way to access it is by going to the computer and waking it by moving the mouse. Ive got a Desktop PC which i need to connect to from time to time using Microsoft Remote Desktop Mac MRD.
0 kommentar(er)
